Главная » Статьи » Разное

I2C (TWI) Часы, память, датчик температуры RTC DS1307+EEPROM+DS18B20



Датчик температуры DS18B20

Всё цифровое и на одной маленькой плате!!!

Работает на шине I2C

Не содержит запаянных контактов.

Описание с официального сайта:

DS1307 is a real-time chip of DALLAS company,which adopt I2C

protocal to communicate with SCM, and there was this kind interface on Arduino, therefore is very convenient to link with each other. DS1307 have a programmable waveforms output, it can be used to drive LED lights, or trigger a certain event as a break off, but be careful when you use it to take some kind of high power module. We design the real clock module to pin out the I2C interface of Ds1307 and programmable waveforms output interface SQW are connected, but usually we will only use the I2C interface to realize basic set the clock/read function. Note, this module must be installed on the battery can work normally. The battery is button batteries (type CR1220), the positive upward:

Note : this shield include the batteries

This tiny module embraces DS1307 time module, DS18B20 temperature module and AT24C32 storage module. DS1307 and AT24C32 are connected to IIC bus. And DS18B20 can be visited via DS pin.

Feature :

1、Power supply: 5V DC and Button Battery

2、Interface: IIC

3、Size: 16mm * 22mm * 23mm (Almost same size as CR2032 Button Battery)

4、Memory Capacity : 32K bit

5、IC: DS1307,DS18B20,AT24C32 ; DS1307 and AT24C32 can be used separately

6、Have the automatic adjustment function of second、minute、day、month and year

7、Take alarm output function and cut off power protection function

Категория: Разное | Добавил: tigerman (01.08.2011)
Просмотров: 4526 | Рейтинг: 0.0/0
Всего комментариев: 0
Добавлять комментарии могут только зарегистрированные пользователи.
[ Регистрация | Вход ]